热射流起爆过程的数值模拟

采用改进的化学非平衡流解耦方法处理Euler反应流方程,并以H2/air 9组分21方程模型对竖直喷注的热射流起爆过程进行了二维数值模拟。对流项采用五阶WENO离散格式,时间推进采用二阶Runge-Kutta方法。详细分析了热射流以不同速度、入射位置、入射宽度和入射倾角喷射时在爆震管内形成的流场,总结了射流参数状态影响起爆的一般规律;解释了激波、火焰的相互作用对"热点"的形成以及转变为爆震的影响,特别是激波反射对"热点"形成的促进作用。结果表明,爆震波通常由火焰面和固壁附近狭长未燃区域中的"热点"产生。"热点"向爆震波发展的过程是过驱爆震阶段,存在三波结构。为了实现快速起爆,应当增大射流入射速度、贴近侧壁并以适当入射角度喷射热射流。     

固体中的高压声速

高压声速是表征凝聚介质在极端条件下性质的重要参数之一。从冲击绝热线和Gruneisen物态方程出发,导出了与冲击绝热线相容的等熵线,进而给出了沿等熵压缩线和等温压缩线以及冲击绝热线的声速的计算公式。对铝和钨的Hugoniot声速进行了计算,计算结果与实验结果符合得很好。     

高速电弧喷涂FeCrBSiMnNbW非晶纳米晶涂层组织及性能

研究开发了一种FeCrBSiMnNbW新型喷涂粉芯丝材,并采用自动化高速电弧喷涂技术在镁合金基体上制备了FecrBsiMnNbw非晶纳米晶涂层。对Fe基非晶纳米晶涂层和传统的3Cr13涂层的组织结构、力学性能以及油润滑条件下的摩擦学性能进行了对比分析,结果表明：与3Cr13涂层相比,铁基非晶纳米晶涂层组织更加致密,孔隙率低,具有相对较高的硬度和拉伸结合强度;形成了非晶相和纳米晶相组成的复合结构,使得涂层具备更好的摩擦学性能。     

Zn-Al—Mg-RE高速电弧喷涂工艺过程的氧化行为分析

为分析高速电弧喷涂工艺制备Zn-Al-Mg-RE防腐涂层的氧化行为,通过XRD、SEM和EDS试验探究了喷涂工艺对该涂层氧化物的组成、含量及其形态的影响规律,并测试了涂层的中性盐雾腐蚀性能。结果发现：该涂层具有典型的层状结构特征,在相互叠加的扁平颗粒之间有很薄的氧化物膜,同时在扁平颗粒的内部也非均匀地分布着富氧化物区,XRD显示这些氧化物主要为ZnO2和尖晶石结构的ZnAl2O4与MgAl2O4等。分析认为：喷涂时液态金属熔滴在高速气流剪切力作用和反应热梯度作用下,加剧了Zn-Al-Mg-RE熔滴的氧化,这些交错分布的氧化物对合金相产生了较好的屏蔽效果,从而提高了涂层的耐蚀性能。     

ISAR成像方位向定标方法研究

提出了一种适合工程应用的ISAR方位向定标方法,通过对相位数据的平滑、分段、拟合,完成了对转速的快捷准确的估算,同时分析了散射点分布对定标精度的影响,结合仿真和试验数据验证了方法的有效性,并根据工程实践的经验,提出了一些提高定标精度的准则。     

数值模拟气液针栓式火箭发动机喷雾燃烧对声学激励的响应

为研究气液针栓式火箭发动机的声学振荡特性并为其优化设计提供指导,加工了具有矩形燃烧室的LOX/GCH₄针栓式发动机,采用Euler-Lagrange方法仿真横向速度扰动产生的声学响应,以期在热试前了解声学激励频率对非稳态喷雾燃烧过程的影响。仿真结果表明,采用的横向速度扰动能在燃烧室内产生同频率的一阶横向声学振荡响应。喷雾燃烧对声学激励的响应强弱受扰动频率与燃烧室一阶横向振荡模态固有频率的相对大小影响较大。当扰动频率与该固有频率相等时,压力和燃烧释热随速度扰动出现同相振荡,压力振荡幅值显著增高导致燃烧室前半段的喷雾和火焰同步摆动;同时,燃烧室内存在扩散燃烧变为预混燃烧的趋势,甲烷在更短的距离内燃烧完全且燃烧室温度趋于均匀。     

Experimental investigation on anti-penetration performance of polyurea-coated ASTM1045 steel plate subjected to projectile impact

In this study, the anti-penetration performance of polyurea/ASTM1405-steel composite plate subjected to high velocity projectile was analyzed. Two kinds of modified polyurea material (AMMT-053 and AMMT-055) were selected and a ballistic impact testing system including speed measuring target system and high-speed camera was designed. This experiment was conducted with a rifle and 5.8 mm projectile to explore the effects by the polyurea coating thickness, the polyurea coating position and the glass-fiber cloth on the anti-penetration performance of polyurea/ASTM1405-steel composite plate. The result showed that the effects of polyurea coating position were different between two types of polyurea, and that the effects of glass-fiber position were disparate between two types of polyurea as well. For AMMT-053 polyurea material, it was better to be on front face than on rear face; whereas for AMMT-055 pol-yurea, it was better to be on rear surface although the difference was very subtle. Additionally, formulas had been given to describe the relationship between the effectiveness of polyurea and the thickness of polyurea coating. In general, AMMT-055 had better anti-penetration performance than AMMT-053. Furthermore, five typical damage modes including self-healing, crack, local bulge, spallation and local fragmentation were defined and the failure mechanism was analyzed with the results of SHPB test. Additionally, the bonding strength played an important role in the anti-penetration performance of polyurea/steel composite plate.     

Influence of thickness and projectile shape on penetration resistance of the compliant composite

The present study deals with development of conceptual proof for jute rubber basedflexible composite block to completely arrest the projectile impacting the target at high velocity impact of 400 m/s through numerical simulation approach using finite element (FE) method. The proposed flexible composite blocks of repeating jute/rubber/jute (JRJ) units are modelled with varying thickness from 30 mm to 120 mm in increments of 30 mm and impacted by flat (F), ogival (O) and hemispherical (HS) shaped projectiles. All the considered projectiles are impacted with proposed flexible composite blocks of different thicknesses and the penetration behaviour of the projectile in each case is studied. The penetration depth of the projectile in case of partially penetrated cases are considered and the effect of thickness and projectile shape on percentage of penetration depth is statistically analyzed using Tagu-chi's design of experiments (DOE). Results reveal that the though proposedflexible composite block with thickness of 90 mm is just sufficient to arrest the complete penetration of the projectile, considering the safety issues, it is recommended to use theflexible composite with thickness of 120 mm. The nature of damage caused by the projectile in the flexible composite is also studied. Statistical studies show that thickness of the block plays a prominent role in determining the damage resistance of the flexible composite.     

光纤陀螺惯性导航算法及其仿真

针对角速率和比力输入时的惯性导航算法进行了深入的研究。对高动态环境下的不同的姿态更新算法进行了对比研究,提出了一种新的速度和位置更新中的转动补偿算法,它将低动态和高动态(划船效应和涡卷效应)转动效应合二为一进行修正。并对系统算法进行了计算机仿真研究,最后给出了仿真结果。     

液压驱动型四足机器人对角小跑步态本体水平位置控制方法

为了对对角小跑中四足机器人本体的水平位置进行控制,建立基于沿支撑线方向运动分解的机器人近似动力学模型,将本体和对角支撑腿简化为一个七连杆结构和一个线性倒立摆,并且基于线性倒立摆解析模型提出摆动腿落足点位置计算方法,进而实现对本体水平位置的控制。针对液压作动器伸缩速度受限的问题,利用单腿冗余关节将关节角速度优化问题转化为标准二次型规划问题,通过设计二次型规划问题解法,降低对摆动腿关节角速度的需求,并且避免了传统伪逆方法可能产生的腿部奇异位型。仿真和实验结果表明:该方法能够实现在关节角速度受限的情况下,有效跟踪本体水平位置的期望轨迹。